Wrist Strap Tester

Our ESD wrist strap tester checks the complete path from wrist strap, through cord and wearer, to ground in seconds. Wrist straps drain static charge from personnel to ground, but cords break and bands wear, so each strap should be tested at least daily before use.

Specifications:

Measurement Range : Wrist Strap 0.75 to 10 Meg ohm

Pass Indication : Resistance between 0.75 to 10 Meg ohm

                               Pass – GREEN LED

Low & High Fail – RED LED (with Alarm)

Test actuation: By Press & Hold metal sensor plate

Accuracy: +/- 10%

Power supply: 9 Volt Battery

Low Battery: Warning less than 7Volts

Dimensions: 135 x 70 x 25 mm

Weight: 150 gms (With Battery)